VELCRO® 90086 General Purpose Sticky Back – 5 ft Length x 0.75" Width – Dispenser Included – For Multipurpose – 1 Each – Black

General Information

Manufacturer:Velcro Companies
Manufacturer Part Number:90086
Manufacturer Website Address:http://www.velcro.com
Brand Name:VELCRO®
Product Line:Sticky Back
Product Name:90086 General Purpose Sticky Back
Marketing Information:Sticky Back Tape adheres to most smooth surfaces. Use on walls, glass, tile, plastic or metal. Tape works in conjunction with other fasteners or adheres to itself.

Packaged Quantity:1 Each
Product Type:Hook & Loop Fastener
Product Information

Tape Width:0.75″
Tape Length:5 ft
Dispenser Included:Yes
Application/Usage:Multipurpose
Physical Characteristics

Product Color:Black
Weight (Approximate):3.57 oz
Miscellaneous

Additional Information:

Shape:

Roll

Care and Application:

Instructions:

• Clean and dry surface before application.
• Peel tape from fastener and press firmly into place.
• Adhesive reaches maximum strength after 24 hours.

Note: Not recommended for fabrics, flexible vinyl or outdoor use. Continued exposure to full sunlight can damage fastener.

Removal Instructions:

• Warm the tape (Hook or Loop) with a hair dryer. (Do not use a heat gun)
• Peel off the tape (Hook or Loop) the adhesive will remain on the substrate
• Warm the adhesive with the hair dryer (again, do not use a heat gun), peel off a piece and roll in a ball
• Cool the adhesive down. This may be done with ice in a plastic bag (only takes a few moments)
• Stick the ball on the adhesive which is on your substrate and pull it off
• Repeat step # 5 until the adhesive is completely removed from the substrate. This may take some time
• If any residue tackiness remains on the substrate you may now use a commercial remover like Goo Gone, acetone, WD-40, mineral spirits or citrus based cleaners

Weight Rating:

1 lbs per square inch up to 5 lbs

Functional Temperature Range:

0-100° F (-18-38° C)

Recycled:No
Assembly Required:No
Country of Origin:United States